GMV NGV A3 - Page 46

ENG
NGV A3 VALVE
INSTALLATION, USE AND MAINTENANCE
46/ 53
10991483 EN -1.10 - 26.05.2023
6.4 SENSOR REPOSITIONING
The adjustment of the sensors must be carried out when the
system is stationary.
6.4.1 S1 SENSOR
6.4.2 S2 SENSOR
6.4.3 S3 SENSOR
1. Using the PT01 programmer
select the 9.8 S3 tuning and
activate it by pressing ENT
2. Proceed as shown in the figure
3. Turn off the 9.8 S3 tuning
feature by pressing ESC