2 GOSSEN Müller & Weigert
Contents
Page
1 Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3 Terminal Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3.1 External Control Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4 Basic Instrument Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5 Programming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5.1 Display Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5.2 Measuring Range Matching for 0 – 20 mA and 4 – 20 mA . . . . . . . 10
5.3 Measuring Range Matching for Pt100 Temperature Sensor . . . . . . . 10
5.4 Measuring Range Matching with HCAL (hardware calibration). . . . . . 10
5.5 Measuring Range Matching with PCAL (software calibration) . . . . . . 11
5.6 Relay Switching Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5.7 Limit Value Switching Points. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5.8 Setting Hysteresis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5.9 Securing the Selected Limit Values . . . . . . . . . . . . . . . . . . . . . . . . . 12
6 Setting the Limit Values During Operation . . . . . . . . . . . . . . . . . 13
7 Mean Value Generation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
8 Technical Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Notes and Warnings
This instrument has left the factory in flawless technical safety condition. In
order to maintain this condition, as well as to assure hazard-free operation,
the user must observe all notes and warnings which are contained within the
operating instructions. If, due to damage, it can no longer be assumed that
hazard-free operation is possible, the instrument must be removed from ser-
To Next Page
Loading...