Go Power! Modified Sine Wave Inverter
Owner’s Manual
3
1. Introduction
The Go Power! Inverter series provides mobile power for people on the go. Run
standard AC appliances wherever you travel. Silent, lightweight and simple to use,
Go Power! Inverters can be used in a wide range of applications including remote
homes, RVs, boats and long haul trucks. It will operate most televisions and VCR's,
personal computers and small appliances including drills, sanders, grinders, mixers,
blenders and microwaves.
To get the most out of your power inverter, it must be installed and used properly.
Please read the instructions in this manual before installing and using your
inverter.
2. Specifications
2.1 GP2500 Inverter 12V
Output 2500 W
Output wave form Modified Sine Wave
Output voltage 120 ± 5 VAC
Regulation ± 5%
DC input voltage 10-15 V
Low battery alarm 10.5V ± 0.5%
Low battery shut-down 10V ± 0.5%
Efficiency 85-90%
Frequency ±1% 60 Hz
No load current 0.77 A
Surge rating 3600 W
Over thermal protection Yes
Two Cooling fans - continuous Yes
Overload protection Yes
Dimensions (LxWxH) 475 x 242 x 89 mm
19” x 9.7” x 3.6”
Net weight 6 kg
13.2 lbs
Inverter Install Kit GP-DC-Kit 4
2.2 GP1750HD Inverter 12V
Output 1500 W
Output wave form Modified Sine Wave
Output voltage 115 VAC
Regulation + 5% -10%
DC input voltage 10-15 V
Low battery alarm 10.7 V ± 0.2
Low battery shut-down 10V ± 0.2
Efficiency 85-90%
Frequency ±1% 60 Hz
No load current 1.0 A
Surge rating (8 seconds) 1750 W
Surge rating (3 seconds) 2000 W
Over thermal protection Yes
Cooling fan – thermal controlled Yes
Overload protection Yes
Dimensions (LxWxH) 480 x 240 x 90 mm
19.2” x 9.6” x 3.6”
Net weight 5.5 kg
12.1 lbs
Inverter Install Kit GP-DC-Kit 3