Go Power GP-1750HD GP - GP2500 Rear View Features

Go Power! Modified Sine Wave Inverter
Owner’s Manual
6
3.3 Rear view – GP 2500
a) Ventilation port:
Do not obstruct, allow at least 1 inch for air flow.
b) Battery terminals:
Connect to 12 V battery or other 12 V power source. Note that "+" is positive, "-" is
negative. Reverse polarity connection will blow internal fuse and may damage
inverter permanently.
Warning!
Operation of the
inverter without a
proper ground
connection may
result in an electrical
safety hazard.
a. Ventilation
p
ort
b. Battery terminals