Go Power GP-ISW-R-12 User Manual

page 2 | gpelectric.com
1. CONTENTS
2. FEATURES ..........................................................................................................................2
3. SPECIFICATION .................................................................................................................2
4. INTRODUCTION .................................................................................................................3
4.1 FRONT PANEL INTRODUCTION .................................................................... 3
4.2 REAR PANEL INTRODUCTION ...................................................................... 5
1.0 TABLE OF CONTENTS
2.0 FEATURES
The GP-ISW-R remote allows the switching on and off of any GP-ISW inverter from a
remote location. The LED display indicates the following:
• Battery bank voltage display
• Output power display
• Error condition indicator (High Battery, Low Battery, Over Temperature, Over
Load conditions)
• Action condition indicator (INV, POWER SAVING, GRID)
3.0 SPECIFICATIONS
Specication Item GP-ISW-R-12/24
Input Voltage 10.5 ~ 66VDC
Operating Temperature Range 0 ~ 40°C
Storage Temperature Range -30°C ~ 70°C
Standby Current Draw < 80mA
Compatible Inverters GP-ISW700/1000/1500/2000/3000/4000

Go Power GP-ISW-R-12 Specifications

General

Brand	Go Power
Model	GP-ISW-R-12
Category	Remote Control
Language	English