10
WARNING: Do not exceed 22V input for the Link. Doing so can cause
serious damage to the Yeti and potential bodily injury. Take note of
voltages when using third party solar panels or third party lead acid
batteries with the module. Do not chain solar panels or lead acid
batteries in series (positive to negative, positive to negative, etc.),
as this can result in dangerously high voltages.
WARNING: Never connect a power source to the Yeti Link before
installing into the Yeti. Always connect the Link to the Yeti before
connecting any power source.
WARNING: To reduce risk of fire, injury to persons or damage to
property, use only in the manner intended by Goal Zero
WARNING: The Goal Zero Yeti Link Vehicle Charging Kit transmits,
power into the Link Module and Yeti at very high amperages up to
80A Max Current. Use Extreme caution when installing. Use only
Goal Zero supplied cables and connections in installation. If installed
with 3rd party connections or alterations are made to Goal Zero
suppled cables damage to components, vehicle or person may occur.
WARNING: Improper connections will damage the Yeti Link Vehicle
Charging kit and/or cause serious injury or death. Be sure that all
wiring is connected to the appropriate polarity
To Next Page
Loading...