Need help?Do you have a question about the GOAL ZERO Yeti Link and is the answer not in the manual?
General| Operating Temperature | 32-104F (0-40C) |
|---|---|
| Material | Plastic |
| Input Voltage | 14-22V |
| Output Voltage | 12V |
| Input | Anderson Powerpole Port |
| Output | Anderson Powerpole Port |
| Battery Compatibility | Yeti Lithium |
| Compatibility | Yeti Power Stations |
| Function | Expands the capabilities of Yeti Power Stations |
| Ports | Anderson Power Pole (Input and Output) |
Covers warnings on high amperages, cable usage, disassembly, water, and secure connections.
Identifies the front panel components of the Yeti Link Expansion Module, including indicators and ports.
Identifies the rear panel EC8 External Battery Connector and fan vent on the Yeti Link Expansion Module.
Details initial steps for installing the Yeti Link module, including lid removal and carriage preparation.
Explains connecting the Link module's cables and securing it into the Yeti with screws.
Describes plugging in the EC8 cable and power source, and initial charging indicator behavior.
Explains how the Link integrates with Yeti and Tank for energy storage and power flow in Tank Mode.
Describes connecting Yeti Tanks and clarifies the 8mm port's function for charging the Yeti and Tank.
Warns about high amperages, using Goal Zero cables, improper connections, and voltage limits.
Explains recharging from a vehicle and how to switch between Tank and Vehicle modes using the reset button.
Details the process of connecting the Yeti Link to a vehicle's battery or alternator using specific cables.
Explains the function of Input Charge, Lead-Acid State of Charge, and Error LEDs.
Addresses common issues like tank charging, initial identification, and third-party battery compatibility.
Provides detailed specifications including charging, ports, weight, dimensions, warranty, and certifications.
To Next Page
