6 7
Solar Panel
Rated Power 100W
Cell Efficiency 22%
Operating Voltage (peak power) 17.1V
Operating Current (peak power) 5.84A
Open Circuit Voltage VOC 20.52V
Short Circuit Current ISC 6.14A
Series Fuse Rating 9A
Temperature Coefficient (power) -.39%/°C
Temperature Coefficient(Voltage) -.3%/°C
Temperature Coefficient(current) .06%/°C
Operating Temperature -40° to 185°F
Connection
Connector MC4
®*
Cable Length 36in
Cable AWG 12 AWG
General
Weight 13.2lbs/6kg
Dimensions 23.07 x 38.58 x 1.18in
58.6 x 98 x 3cm
Certs
Warranty 2 years
Ingress Protection IP67
Technical Specifications
*For warranty terms, conditions, and registration, go to www.goalzero.com/warranty.
* Based on Standard Test Conditions with Solar irradiance at 1000W/m^2, cell
temperature of 25C and air Mass AM = 1.5
Q: Can I plug the Boulder 100i directly into a Goal Zero Yeti?
A: No. You need an MC4
®*
to HPP adapter to connect the Boulder
100i to a Yeti. These panels are intended for RV installations
with the Goal Zero Escape Ecosystem.
Q: How many solar panels can I connect together?
A: It varies depending on the device you’re pairing your panels
with. For example, the Goal Zero Yeti PRO 4000 will accept
a maximum of 5 Boulder 100i panels in series, while the Yeti
1500X and all other ‘X’ line products can only accommodate 2
panels in series.
Q: Can I chain my Boulder 100i with third-party solar panels?
A: No. The Boulder 100i is not guaranteed to work with any other
manufacturers’ products. Many solar panels are manufactured
differently. Pairing your Boulder 100i with third-party panels may
result in product damage, fires, or other serious issues.
Frequently Asked Questions
*MC4
®
is a registered trademark of Staubli Electrical Connectors
*MC4
®
is a registered trademark of Staubli Electrical Connectors
To Next Page
Loading...
Need help?
General
