Gobius Pro - Configuration and Calibration; Tank Configuration

3
The App is now searching for your sensor. When you have your sensor Bluetooth
connected, you can say “Hello” to the sensor. The sensor will give back an audible
signal. If you cannot get in contact with the sensor, see also note 1, above.
11
Now it is time for configuration.
- Give your tank a name
- Alarm in your phone, select
o When the level is above the sensor
o When the level is below the sensor
o Always off
- Fluid, select
o Water tank
o Gasoline tank
o Diesel tank
o Grey water tank
o Waste/black water tank
o Oil tank
o Other fluid tank
- Measurement period, select
(time between measurement)
o 10 sec
o 30 sec
o 1 min
o 2 min
o 1 hour
o 4 hour
o 24 hour
o 48 hour
o Never
- Tank material, select
o Polyethene
o Steel
o Stainless steel
o Aluminum
o Fiber Glass
- Digital output 1, select (green and red cable)
o Always off
o Always on
o On when the level is above the sensor