6
18
Sample with the Gobius fish panel
Digital output 1: Select, “On when the level is above the sensor”,
please connect the green cable + the red cable to the fish cables.
The red LED will light when the level is above the sensor.
Digital output 2, Select, “Always on”, please connect the yellow cable + the red
cable to the fish cables. The green LED will always light when the power to the
sensor is on.
19
Adding more sensors
Start always from the lowest sensor and go up wards, one by one sensor.
20
Editing several sensors
You can always make a new Calibration for all sensors at the same time, as well as
changing settings like measurement period, titles, digital outputs and warning yes
or no.
For more information, please contact
Gobius Sensor Technology AB
Anders Meiton, CEO and inventor of Gobius products
Phone: +46 (0)31 650170
E-mail: anders.meiton@gobius.se
Gobius Sensor Technology AB develops and markets innovative products and solutions
that create positive effects for boat owners and the worldwide maritime environment. The
products are easy to install, easy to use, reliable and are environmentally friendly. Gobius
is marketed by distributors and dealers in 22 countries. The company started in 2008 and
has launched products, which in an easy and effective way, from the outside of the tank,
measure the level of waste, water, fuel and fluid tanks. We have also received some
awards in Sweden, Europe and USA. Patent/Trademarks: US 8.448.509, Sweden 0701520-
9 and EU 2165164. Trademark Gobius, owned by Gobius Sensor Technology AB.
For further information, please visit www.gobiuspro.com and
www.gobius.se.
To Previous Page
Loading...