5
More information on the Tank screen
- ABOUT, gives you
o Version no
o Name of the developers
o Support, direct mail to contact our Support Center
Enter your mail address, phone, Description
Add some photos of the sensor on the tank
This will help us a lot to understand your problem.
o GDPR And Warranty issues
- GUIDE
o Direct access to install next sensor
15
Level information
If you have one or two sensors on the tank, you get a dot in
red or green, showing if the level is above or below the sensor.
See also point 11 above in this instruction.
If you have more than two sensors, you get a bar chart showing
the level in your tank. Depending on the choice of fluid, you get
different colors on the bar.
16
Sharing Tank Settings
You can always share your Gobius Pro with a friend. Sharing is only possible within
the same operating system, iOS and Android. Ice not from an iPhone to an
Android, or the other way around.
17
From the configuration icon (cogwheel) on the Tank screen, you
can make an extra measurement. Please note that your phone must be
Bluetooth connected to the sensor.
18
Edit the sensor Settings
You can always change the settings when you like to do it, like change the Tank
name.
When you do a new Calibration it will be done for all sensors on the tank.
If a title on your phone is in grey, it means that you are not Bluetooth connected
to your sensors.
To Next Page
Loading...