9
3. Align the main body with
the top of the floor head
and push down until it
clicks into place. Turn on
the power.
This set up is useful when
cleaning stairs or sofas.
When finished turn the
power off on the stick vac
and at the mains supply.
Note: Take care when
vacuuming stairs. It is best
to plug in the stick vac at the
bottom of the stairs and work
upwards so the cable isn’t in
the way and doesn’t become a
trip hazard.
4. For low level cleaning
with the crevice/brush
multi-tool, simply slide the
attachment directly onto
the end of the main body.
For high level cleaning,
slide the attachment onto
the end of the extension
pole.
5. To use the brush
attachment on the crevice
tool, pull the top brush
section in the direction of
the arrow until it clicks into
place.
6. To use the crevice tool,
simply push the brush back
to the reverse position.
To Next Page
Loading...
