Gocycle GS - 6.8 Adjusting the PitstopWheel Quick Release Cam Levers

Gocycle
®
Owner’s Manual for GS, August 2018
© Karbon Kinetics Limited. All Rights Reserved. 50
Replace both calliper securing bolts.
Secure to a torque of 6-8 Nm.
Ensure that the brake calliper is parallel
to the disk rotor when tightened in
order to prevent disk rub.
WARNING! The braking performance of
new brake pads will increase over time.
Ensure that you “bed-in” your brakes by
performing a number of stops