Gocycle
®
Owner’s Manual for GS, August 2018
© Karbon Kinetics Limited. All Rights Reserved. 34
6 MAINTENANCE AND ADJUSTMENTS
6.1
Maintenance and Service
In the event that you require maintenance and service please refer to your nearest authorized Gocycle
service center. A list of approved service centers can be found at www.gocycle.com. Before
attempting any maintenance on your Gocycle you must visit www.gocycle.com/safety for up to date
important safety related information.
NOTE: You must perform regular visual inspections of your Gocycle and perform any recommended
adjustments and maintenance in order to ensure that your product is safe to rider. Please visit
www.gocycle.com/safety and review any important Technical Bulletins and safety information relating
to your Gocycle model. You should also download and review the latest Owner’s Manual from
www.gocycle.com/manuals. Please note the recommended inspection and service interval below.
6.2
Service interval
Recommended Service
Interval
Visual Inspection / Service
if required
Owner or Authorised Gocycle
Reseller (recommended)
After first 100
miles/160 kms
2 months
after first ride
Visit
www.gocycle.com/safety
Check and Update to latest
Firmware Version
Visual Inspection / Service
recommended
Owner or Authorised Gocycle
Reseller (recommended)
Every 2000
miles/3200 kms
6.3
Visual Inspection Guide – (Every 3 Months/ 500 Miles)
The following information details mandatory inspection points to be completed every 3 months/ 500
miles (whichever is sooner) of Gocycle ownership. This is to ensure your Gocycle is safe to ride and
operating at peak performance. If you find any of the following items to be damaged or incorrectly
adjusted then please seek immediate assistance from your nearest Authorised Gocycle Service Centre
who will help rectify any issue. Do not adjust fixtures without first consulting the Owner’s Manual or
your Authorised Gocycle Reseller to ensure the correct adjustment is made. Incorrect adjustment
could lead to premature failure of a component.