EasyManua.ls Logo

Goddess DFA 847 DX7 - 8 Installation Instruction; About Electricity Connecting

Goddess DFA 847 DX7
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...

EN - 79
ning products. Rather, use only a cloth and warm soapy water. To remove spots or stains from
the surface of the interior, use a cloth dampened with water and a little white vinegar, or a clea-
ning product made specically for di shwashers.

When you go on holiday, it is recommened that you run a wash cycle with the dishwasher empty
and then remove the plug f rom the socket, turn off the water supply and leave the door of the
appliance slightly ajar. This will help the seals last longer and prevent odors from forming
within the appliance.

If the appliance must be moved, try to keep it in the vertical position.If absolutely necessary, it
can be positioned on its back.

One of the factors that cause odors to form in the dishwasher is food that remains trapped in the
seals. Periodic cleaning w ith a damp sponge will prevent this from occurring.


CAUTION for personal safety:
DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS APPLIANCE.
DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE THIRD GROUNDING
PRONG FROM THE POWER CORD.

Please see the rating label to know the rating voltage and connect the dishwasher to appropri-
ate power supply, which has a required fuse 16 amp. Time delay fuse or circuit breaker recom-
mended and provide separate circuit serving only this appliance.


After making sure that the voltage and the frequency values for the current i n the home cor-
respond to those on the rating plate and that the electrical system is sized for the maximum
voltage on the rating plate, insert the plug into an electrical socket which is earthed properly. If
the electrical socket to which the appl iance must be connected is not appropriate for the plug,
replace the socket,rather than using a adaptors or the like as they could cause overheating and
burns.
Note: danger voltage in the appliance.

Table of Contents

Related product manuals