Goddess DFA 847 DX7 - Error Codes; Technical Information


EN - 85
Dishwasher leaks Overll dispenser or rinse aid spills Be careful not to overll the rinse
aid dispenser.
Spilled rinse aid could cau-
se oversudsing and lead to
overowing. Wipe away any spills
with a damp cloth.
Dishwasher isn‘t level Make sure the dishwasher is
level.
Water ow out Damaged or detective drain pump Replace the drain pump

When some malfuctions come on, the appliance will dissplay eror codes to warn you:
Codes Meanings Possible Causes
E1 Longer inlet time. Faucets is not opened, or water
intake is restricted,or water pres-
sure is too low.
E3 Longer heating time, but not rea-
ching required temperature
Malfunction of temperature sensor
or of heating element.
E4 Overow. Some element of dishwasher
leaks.
E6 Failure of temperature sensor Short circuit or break of tempera-
ture sensor.
E7 Failure of temperature sensor Open circuit or break of tempera-
ture sensor.

If overow occurs, turn off the mainwater supply before calling service. If thre is water in the
base pan because of an overll or small leak, the water should be removed before restarting the
dishwasher.
