12
Safety Instructions and Attentions
First of all, as the most basic principle: This product is a professional lighting set equipment and should
be used by professional lighting engineers or under the guidance of professionals. Basic safety attentions
must always be followed during use, as follows:
Before use, please read and understand these instructions and attentions.
Professional lighting is prohibited for children. When children are near, parents or accompanying persons
must supervise closely to prevent children from personal injury due to collision with lamps or private use of
lamps.
This lighting product is not ordinary lighting product and cannot be used for general lighting. Anyone who
has suffered eye damage or has sensitive eyes should avoid using this product.
When the lamp is on, it must be used with care. Do not touch high-temperature parts, such as LED lamp
beads, to avoid burns.
When the lamp is on, it is forbidden to look directly at the lamp beads under any circumstances. Strong
light should be used under the guidance of professional lighting engineers. Avoid prolonged exposure to
strong light under any circumstances. If eye discomfort, please turn off the lamp in time, suspend use, and
see a doctor immediately.
If the lamp bead is damaged or deformed by heat, stop using this equipment, and contact the
manufacturer, service agent or qualied maintenance personnel to replace the lamp bead in time to avoid
accidents.
This product is only suitable for use in -10
℃
to 40
℃
operating environment and normal humidity
environment.
Do not use damaged equipment or accessories, and wait for professional maintenance personnel to check
and repair to conrm being normal before use.
During using, if the casing of this product is broken due to being dropped, squeezed or subjected to strong
impact, please do not use it, so as to avoid electric shock injury due to contact with internal electronic
components.
Be sure to unplug equipment from the power outlet before cleaning and repairing. When not in use, do
not pull the power cord to unplug the equipment. For normal power-off, please hold both ends of the
plug of the equipment with your hands and pull the plug out of power outlet. This equipment needs to be
connected to a grounded outlet.
This equipment is not waterproof, please keep it dry and do not immerse it in water or other liquids. The
equipment should be installed in a dry and ventilated place, and avoid using it in rainy, humid, dusty or
overheated environments. Do not place any objects on the lamp or let liquid flow into the lamp to avoid
accidents.
Do not disassemble the product without permission. If the product fails, it must be checked and repaired
by authorized maintenance personnel.
Before storing, make sure that the equipment has cooled down completely. For storage, unplug the power
cord from the equipment. The equipment should be placed in the carrying case or in a ventilated dry place.
Do not place equipment near flammable and volatile solvents such as alcohol and gasoline.
Do not use accessories that are not recommended by our factory to avoid re, electric shock or personal
injury.
When cleaning, do not wipe it with a damp cloth, please use a dry cloth or a soft cloth to wipe the dirt of the
equipment.
Please take off the protective cover before using.
This product complies with ROHS
,
CE
,
and FCC certication, please refer to the relevant national
standards for use and operation.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.