Do you have a question about the Godox TT685N Thinklite TTL and is the answer not in the manual?
How to activate and use the i-TTL autoflash system for automatic exposure.
Enables flash synchronization at high shutter speeds.
Adjusts flash output to correct exposure when TTL is insufficient.
Controls flash power and uses optic S1/S2 slave units in manual mode.
Covers positioning, range, switching modes, channels, and master unit configuration.
How to perform i-TTL autoflash wirelessly with slave units.
Safeguards against overheating and system errors.
Addresses problems like charging, firing, exposure, and photo quality.
| Compatibility | Nikon i-TTL |
|---|---|
| Power Source | 4 x AA Batteries |
| Color Temperature | 5600K ± 200K |
| Flash Duration | 1/300 to 1/20000 Second |
| Guide Number | 60 m (ISO 100, 105 mm) |
| Flash Modes | TTL, Manual, Multi |
| Zoom Range | 20-200 mm |
| Recycling Time | 0.1 to 2.6 Seconds |
| Wireless Triggering | Yes, 2.4 GHz |
| Tilt Head | -7 to +90° |
| Swivel Head | 360° |
| Wireless Range | Up to 100 m |
| Wireless Channels | 32 |
| Wireless Groups | A, B, C |












Loading...