Need help?Do you have a question about the Godox TT685II-N and is the answer not in the manual?
General| Type | Speedlite |
|---|---|
| Channels | 32 |
| Groups | 5 (A, B, C, D, E) |
| Off-Camera Terminal | 3.5mm |
| Color Temperature | 5600K |
| Wireless Function | Master/Slave |
| Compatibility | Nikon |
| Guide Number | 60 m |
| Zoom Range | 20-200mm |
| Recycle Time | 0.1-2.5s |
| Flash Duration | 1/300s to 1/20000s |
| Power Source | 4 x AA batteries |
| Wireless Triggering | Yes |
| Wireless Range | 100m |
| Flash Modes | TTL, Manual, Multi |
Safety precautions for using the flash unit, including avoiding moisture, disassembly, and eye exposure.
Explains the LCD display for i-TTL mode, including zoom and flash settings.
Shows the LCD display for manual flash mode with output settings.
Explains the setup for transmitting and receiving signals wirelessly.
Illustrates the LCD panel when the flash is attached to the camera.
Shows the LCD display for the flash acting as a transmitter.
Displays the LCD panel for the flash acting as a receiver.
Lists accessories that can be purchased separately to enhance functionality.
Step-by-step guide on how to attach and detach the camera flash.
Explains the i-TTL flash mode and its associated functions.
Details how to enter and use the i-TTL flash mode.
Explains how to use High-Speed Sync (FP flash) for synchronizing with fast shutter speeds.
How to set up the flash as an optic S1 secondary unit for slave triggering.
How to set up the flash as an optic S2 secondary unit for slave triggering.
Illustrates positioning and operation range for a single receiver.
Explains how to set up multiple receiver groups for flash shooting.
Instructions for setting up the transmitter unit for wireless shooting.
Instructions for setting up the receiver unit for wireless shooting.
How to set wireless IDs to avoid interference.
Function to scan for available channels to avoid interference.
Steps for setting up automatic wireless flash with one receiver.
How to set the flash mode to Manual (M).
Steps to set the flash output and group ratios in manual wireless mode.
How to use the sync cord jack for wired triggering.
Explanation of the auto focus assist beam feature and control.
How to use bounce flash by pointing the flash head towards surfaces.
Notes related to catchlight creation and positioning.
Icon and action for low battery indication.
Explains the over-temperature protection mechanism and rest periods.
Lists error prompts (E1, E2, E3, E9) and their meanings.
Effective range for the auto focus assist beam.
Information on power sources, recycle time, and power saving.
Sync triggering modes and working temperature.
Physical dimensions, weight, and frequency range.
Solutions for when the camera flash fails to fire.
Addresses the issue of the flash unit turning off automatically.
Troubleshooting steps for the auto zoom function not working.
Explains causes and solutions for incorrect flash exposure.
To Next Page
