Need help?Do you have a question about the Godox TT600S and is the answer not in the manual?
General| Type | Slave flash |
|---|---|
| Display type | LCD |
| Product color | Black |
| Built-in display | Yes |
| Channels quantity | 32 channels |
| Color temperature | 5600 K |
| Shooting distance | 100 m |
| Flash guide number | 60 m |
| Approximate recycling time | 2.6 s |
| Camera brands compatibility | - |
Weight and Dimensions| Depth | 76 mm |
|---|---|
| Width | 64 mm |
| Height | 190 mm |
| Weight | 500 g |
Ensure the flash unit remains dry and avoid use in wet conditions.
Internal high-voltage parts require caution; do not disassemble.
Cease using if the product sustains physical damage from impact or falls.
Avoid direct flash to eyes, especially for infants, to prevent vision damage.
Do not operate near flammable gases or chemicals due to fire risk.
Avoid storage or operation above 50°C to prevent damage to electronic parts.
Identifies the main physical components of the TT600S flash unit.
Description of buttons for mode selection, zoom, group, set, and test functions.
Explanation of icons and readouts on the LCD screen, including mode and battery status.
Lists the standard items provided with the TT600S flash unit.
Lists optional accessories available for purchase to enhance functionality.
Procedure for attaching and detaching the flash unit from a camera's hotshoe.
Instructions for powering the unit on/off and its automatic sleep mode feature.
How to adjust flash power output in 1/3 stop increments.
Setting the flash coverage to match lens focal lengths from 20mm to 200mm.
Guide to operating the flash in Manual mode for power output and firing.
Instructions for using the stroboscopic flash mode, including frequency settings.
Formula and guidance for calculating shutter speed for stroboscopic sequences.
Table detailing maximum stroboscopic flashes by output and Hz.
Setting up the flash in S1 mode for synchronous firing with a master flash.
Setting up the flash in S2 mode to ignore pre-flashes from TTL master flashes.
Using Hi-Speed Sync for synchronization with high shutter speeds up to 1/8000s.
Activating and using the focus assist lamp for improved autofocus in low light.
Configuring the delay before the focus assist beam automatically shuts off.
Enabling or disabling the audible buzz confirmation for flash operations.
Setting up 2.4G wireless transmission in Master or Slave mode with channel/group control.
Utilizing the wireless control port for remote adjustment of flash functions.
Connecting a trigger via the sync cord jack for synchronized flash firing.
Configuring the sleep function settings to manage battery life.
Configuring custom functions: Sleeping Time, Auto Power Off, Buzz Setting.
Configuring custom functions: Backlight Setting, Optic Slave Mode.
Understanding over-temperature protection and the conditions that trigger it.
Details on additional protection features and error prompt interpretations.
Technique for using bounce flash by directing the light off surfaces.
Using the catchlight panel to add catchlights to subjects' eyes.
Using the wide panel to extend flash coverage to 14mm for softer light.
Key technical specifications of the TT600S flash unit.
Maintenance guidelines and procedures for the flash unit.
Conditions that may void the product's warranty or invalidate claims.
Details on the TT600S's compliance with EU directives and CE marking.
Guidance on the proper disposal of the product as per WEEE regulations.
To Next Page
