17
• For full instructions on the use of FT series remote control, see its user manual.
Sync Triggering
The Sync Cord Jack (7) is a Φ3.5mm plug. Insert a trigger plug here and the flash will be
fired synchronously with the camera shutter.
• This product is equipped with Sleep Function to avoid battery drain when the
flash unit is idle.
• Press < > button and hold for 2 seconds to enter the sleep Function Mode. The
LCD panel displays “SL” (Sleep) and “Sleeping Time”. Idle time before entering
Sleep Mode is 10 minutes by default. Rotate Select Dial < > to set a desired
time for the flash or to turn off Sleep Function. Press < > button to return.
To Next Page
Loading...
