To Next PageTo Next Page
Need help?Do you have a question about the Godox TT685O and is the answer not in the manual?
General| Type | Slave flash |
|---|---|
| Flash modes | Auto, High-speed synchronization, Manual |
| Multi flash | Yes |
| Display type | LCD |
| Product color | Black, Red |
| Flash coverage | 20 - 200 mm |
| Channels quantity | 32 channels |
| Color temperature | 5600 K |
| Shooting distance | 0.6 - 10 m |
| Flash guide number | 190 m |
| Transmission range | 0 - 100 m |
| Operating frequency | 2400 MHz |
| Auto power off after | 60 min |
| Approximate recycling time | 2.6 s |
| Flash duration (max power) | 1/20000 s |
| Flash duration (min power) | 1/300 s |
| Camera brands compatibility | Olympus, Panasonic |
| Approximate recycling time (min) | 0.1 s |
| Battery type | AA |
| Power supply type | Battery |
| Number of batteries supported | 4 |
Weight and Dimensions| Depth | 76 mm |
|---|---|
| Width | 64 mm |
| Height | 190 mm |
| Weight | 410 g |
Thanks the user and lists key features of the TT685O camera flash.
Provides crucial safety precautions for using the camera flash.
Explains TTL mode settings, viewfinder feedback, and pre-flash.
Enables flash sync with all camera shutter speeds for fill-flash.
Creates light trails by firing flash before shutter closes.
Adjusts flash output from full power to 1/128 in 1/3rd stop increments.
Fires rapid flashes to capture multiple images of moving subjects.
Overview of 2.4G radio for TTL autoflash, master/slave and channel settings.
Sets up the flash as master or slave, including channel settings.
Configures flash for manual shooting with wireless slave units.
Configures flash for stroboscopic shooting with wireless slave units.
Illustrates positioning and range for single slave unit autoflash.
Groups slave units for TTL autoflash with flash ratio control.
Uses FT-16S remote for wireless power adjustment and triggering.
Uses sync cord jack for synchronous flash firing with camera shutter.
Softens shadows by bouncing flash off walls or ceilings for natural lighting.
Sets flash coverage manually or automatically, extends coverage with wide panel.
Lists and explains available custom function settings for the flash unit.
Details over-temperature protection and other system safety prompts.
Provides information on updating the flash unit's firmware via USB.
Provides specifications for the TT6850 flash, including type, guide number, and power.
Offers solutions for common issues like flash not charging, firing, or auto power off.
Lists camera models compatible with the TT6850 flash unit.
Contains FCC compliance information and radiation exposure statements.
Provides guidance on device shutdown, cleaning, and warranty information.
