Godox X3 - Page 24

1. In main interface, slide the screen down from the
top to display <Setting>, press <Setting> to enter
C.Fn. menu. Or you can press the <M/ > button to
display <Setting> on the panel, then press <Setting>
to enter C.Fn. menu.
2. Press <Wireless> to enter wireless settings. Slide
the <CH> on the left to set the channel among 1 to
32. Then slide the screen from the left to the right or
press the <M/ > button to return to the main
interface.
In addition to changing the wireless transmission
channel to avoid interference, we can also change
the wireless ID to avoid interference.
1. In main interface, slide the screen down from the
top to display <Setting>, press <Setting> to enter
C.Fn. menu. Or you can press the <M/ > button
to display <Setting> on the panel, then press
<Setting> to enter C.Fn. menu.
2. Press <Wireless> to enter wireless settings. Slide
the <ID> on the right to set the ID among OFF and 1
to 99. Then slide the screen from the left to the
right or press the <M/ > button to return to the
main interface.
If you need X3 O to control Lux Master to flash, then the wireless sync function can set
their channels and IDs to the same quickly.
First, press the “Wireless Sync” of the flash trigger. Then, press the wireless sync icon of
Lux Master.
Note: Please set the flash trigger and the receiver to the
same channel before usage.
45 46