1. In main interface, slide the screen down from the
top to display <Setting>, press <Setting> to enter
C.Fn. menu. Or you can press the <M/ > button to
display <Setting> on the panel, then press
<Setting> to enter C.Fn. menu.
2. Press < > to enter ZOOM setting, slide the
zoom value to adjust among Auto and 24mm to
200mm.
Scanning spare channel function is useful to avoid
interference from others' using the same channel.
1. In main interface, slide the screen down from the
top to display <Setting>, press <Setting> to enter
C.Fn. menu. Or you can press the <M/ > button to
display <Setting> on the panel, then press
<Setting> to enter C.Fn. menu.
2. Press <Wireless> to enter wireless settings.
Press <SCAN> to start scanning, then six spare
channels are displayed on the panel. Click the
desired channel, the flash trigger will be set to that
channel automatically.
47 48
1. In main interface, slide the screen down from the top to display <Setting>, press
<Setting> to enter C.Fn. menu. Or you can press the <M/ > button to display <Setting>
on the panel, then press <Setting> to enter C.Fn. menu.
2. Press < > to enter shooting mode setting, you can select between one-shoot mode /
all-shoot mode/L-858 mode.
One-shoot Mode: In the M and Multi mode, the lead unit only sends triggering signals to
the follow unit, which is suitable for one person photography for the advantage of power
saving.
All-shoot Mode: The lead unit will send parameters and triggering signals to the follow
unit, which is suitable for multi person photography. However, this function consumes
power quickly.
1. In main interface, slide the screen down from the
top to display <Setting>, press <Setting> to enter
C.Fn. menu. Or you can press the <M/ > button to
display <Setting> on the panel, then press
<Setting> to enter C.Fn. menu.
2. Press < > to enter sync setting, you can
select among front curtain sync, high speed sync
3.Rear Curtain Sync: Press “OK" button on Olympus
camera or "MENU" button on Panasonic camera to
enter rear curtain sync mode setting. When the
< > appears on the display, set the camera
shutter.
2nd-C
To Next Page
Loading...
