AD2400P, AD1200PRO, AD600 Series, AD360II Series, AD200 Series,
V860II Series, V860III Series, V850 Series, TT685 Series, TT685II Series,
TT585 Series, FV Series, V1 Series, Quicker II Series, Quicker III Series, SKII
Series, SKII-V Series, DPII Series, DPIII Series, GS/DSII Series, TT350O,
V350O, AD300Pro, AD400Pro, AD100Pro, V1Pro Series, Lux Master
Note: The range of support functions: the functions that are both owned by X3 O and flash.
1. This table only lists the tested camera models not all Olympus/Panasonic cameras. For the compatibility of
other camera models, a self-test is recommended.
2. Rights to modify this table are retained.
Olympus: PEN-F,E-P3,E-P5,E-PL5,E-PL6,E-PL7,E-PL8,E-M1,E-M10II,E-M10III
Panasonic: DMC-G85,DMC-GH4,DMC-GF1,DMC-GX85,DMC-LX100,DMC-FX2500GK
59 60
X3 O
AD400Pro
AD600, AD600Pro
AD120 0Pro
Auto focus length, varies along with the focus length of the camera
Focus length is 24mm
Focus length is 28mm
Focus length is 35 mm
Focus length is 50 mm
Focus length is 70 mm
Focus length is 80 mm
Focus length is 105 mm
Focus length is 135 mm
Set the flash focus length to 200 mm via flash trigger
Slide the progress bar to adjust the screen brightness
15 sec/30 sec/1 min/2 min/3 min：The screen blacks out after 15
sec/30 sec/1 min/2 min/3 min of idle use
System language is simplified Chinese
System language is English
Note: Transform
the TTL shooting
value into the
output value in
the M mode. The
main light mode
shall prevail in
mixed use.
Turn off TCM transform function
TT685II/V860III series
AD100PRO
AD200
AD300Pro
Restore factory setting
Back to previous interface
Device model is X3 O
The current firmware version is V1.0, the upgraded version (if any) will
be available to download on the official website
X3 O
V1.0
To Next Page
Loading...
