3
• Shut off power and make sure environment
is safe before installation
• Do not plug the HDMI cables and IR cables
in/out when the device is in use to avoid
cable damage. Make sure they are plugged
into the correct ports
• Use the included DC5V power adapters
only. Make sure the specification matches if
using 3rd-party DC power adapters
Introduction
The HDMI HDbitT CAT5e/6 Extender 1080p
with Loopout - 120m extends high definition
1080p HDMI signals from a source device to a
display device up to 120 meters through a single
economical CAT5e/6 cable using advanced
HDbitT transport protocol.
To Next Page
Loading...
