gofanco USB3HDMI - macOS 10.15 Installation

14
11. Check DisplayLink Manager, click Quit and Reopen.
12. Click on the Lock Icon to save your changes.
13. Click DisplayLink Manager Notifications box on the
top right corner of the screen, enable Allow
Notifications. Close the notifications window.
14. At Installation is Complete, click Close.
15. Choose Keep or Move to Trash the DisplayLink
Manager Installer file.
16. Click the DisplayLink Manager Application icon,
check Launch Automatically after login. Close the
DisplayLink Manager Application.
17. The adapter is ready for use.
macOS 10.15
1. Connect your second monitor to the video adapter
(use the included adapter if needed) and turn it on,
then plug the video adapter into the computer.
2. Download the driver at www.gofanco.com/
downloads.
A) For USB 3.0 to HDMI/DVI: Type in USB3HDMI
and click Search.
B) For USB 3.0 to DVI/VGA: Type in USB3DVI, and
click Search.
3. Download the appropriate driver based on your OS
version. Note: Choosing the incorrect driver can lead
to installation issues.