Gold Medal PopClean Elite Popper 600 Series User Manual (English)

Questions and Answers:

D
David JohnsonAug 21, 2025
What to do if Gold Medal PopClean Elite Popper 600 shows Error Code 11 Change Filters?
- J
  Jacqueline MorrisAug 21, 2025
  When a Change Filter error is displayed, the filter system and the kettle heat will not operate until the Box and/or HEPA Filters are changed. If the Change Filters error occurs during a popping cycle, the filter system and kettle heat are shut off and cooking is stopped. You can press (OK) to go to the Settings screen, or turn the machine OFF, change the Box and HEPA Filters, then turn it back ON. Refer to the Updraft or Downdraft Filter section accordingly.
A
anthonyhardingAug 22, 2025
What does Error Code 12 Filter Door Open mean on Gold Medal PopClean Elite Popper 600 Commercial Food Equipment?
- D
  Denise YoungAug 22, 2025
  Error Code 12 indicates that the Filter Door interlock switch is NOT engaged. You can press (OK) to go to the Settings screen, or turn the machine OFF, fix the issue, and then turn it back ON. To fix a Filter Door issue: ensure the door is closed so the door tab engages the interlock switch and make sure EACH compression knob is fully twisted clockwise to lock it in place. Refer to the Updraft or Downdraft Filter section accordingly.
T
Theresa DavisAug 25, 2025
What does Error Code 14 Box Filter mean on Gold Medal PopClean Elite Popper 600 Commercial Food Equipment?
- B
  billydeleonAug 25, 2025
  Error Code 14 indicates that the Box Filter is not installed, or the interlock switch is NOT engaged. You can press (OK) to go to the Settings screen, or turn the machine OFF, install the box filter or make sure it engages the interlock, then turn the machine back ON. Refer to the Updraft or Downdraft Filter section accordingly for instructions on filter installation.
B
Brandi GainesAug 27, 2025
What does Error Code 15 HEPA Filter mean on Gold Medal Commercial Food Equipment?
- J
  Jeremy WaltonAug 27, 2025
  Error Code 15 indicates that the HEPA Filter is not installed, or the interlock switch is NOT engaged. You can press (OK) to go to the Settings screen, or turn the machine OFF, install the HEPA filter or make sure it engages the interlock, then turn the machine back ON. Refer to the Updraft or Downdraft Filter section accordingly for instructions on filter installation.
P
Patrick WilliamsAug 28, 2025
What does Error Code 13 Baffle Filter mean on Gold Medal Commercial Food Equipment?
- E
  Evelyn EvansAug 28, 2025
  Error Code 13 indicates that the Baffle Filter is not installed, or the interlock switch is NOT engaged. You can press (OK) to go to the Settings screen, or turn the machine OFF, install the baffle filter or make sure it engages the interlock, then turn the machine back ON. Refer to the Updraft or Downdraft Filter section accordingly for instructions on filter installation.
C
Christopher DavisAug 29, 2025
What to do if my Gold Medal PopClean Elite Popper 600 kettle does not heat?
- P
  Philip PearsonAug 29, 2025
  The Kettle Heat, Stir Motor, and Filter System MUST BE ON to pop corn. If any of these features are turned off during a cooking cycle, the kettle heat is shut off. The heating element in the kettle may be burned out, so you should contact a qualified service person for inspection/repair.
Y
youngstephanieAug 31, 2025
Why is my Gold Medal PopClean Elite Popper 600 showing Error Code 8 Hi Limit Fault?
- N
  Nancy HallAug 31, 2025
  A Hi Limit Fault can occur if the kettle is not turned off at the end of the last cooking cycle. To resolve this, turn the Power Switch OFF and let the kettle cool down, then turn the Power Switch back ON. If the error still shows, turn the unit back OFF and allow the kettle to cool longer. If the error code persists, contact a qualified service person for inspection/repair.
B
burkejoshuaSep 2, 2025
What does Error Code 10 Check Filter mean on Gold Medal Commercial Food Equipment?
- B
  Brittany BurnsSep 2, 2025
  Error Code 10 indicates the pressure switch detects Box and HEPA Filter efficiency is reduced to less than 80%. The unit will still operate, but have replacement filters available for use when needed. Press (OK) to return to the cooking screen. Otherwise, the error screen goes away when the cooking screen advances to the next phase.
X
Xavier HowardSep 4, 2025
How to fix Error Code 1 Reversed T/C on Gold Medal Commercial Food Equipment?
- E
  Eric RowlandSep 4, 2025
  For a Reversed Thermocouple error code, turn the machine OFF and then ON. If the problem persists, contact a qualified service person for inspection/repair. Note for Twin Units: It is best to turn on both kettles and use them equally throughout the day. If only one kettle is being used for a long period, then when the second kettle is turned on, the temperature variation can initiate a Reversed T/C error code. To fix the error, allow the first kettle to cool down before starting the second kettle. Turn the Power Switch OFF then back ON to reset the display and clear the error. If the error persists, contact a qualified service person for inspection/repair.
D
Dr. Whitney ParkerSep 7, 2025
What to do if Gold Medal PopClean Elite Popper 600 shows Error Code 16 Communication Error?
- J
  Jeanette RogersSep 7, 2025
  Turn the machine OFF, wait 10 seconds, then turn it back ON. If the error persists, contact a qualified service person for inspection/repair.

Gold Medal PopClean Elite Popper 600 Series Specifications

General

Category	Commercial Food Equipment
Model	600 Series
Type	Popcorn Machine
Voltage	120V
Material	Stainless Steel
Warranty	Varies. Check with manufacturer.
Features	Easy-clean kettle