Gold Note PH-10 - QUICK START; ON;OFF; HOW TO SELECT FUNCTIONS

| QUICK START
5
ON/OFF
1 Use the Master Switch on the rear panel
to power the PH-10. The status led turns
blue when the Master Switch is ON.
HOW TO SELECT FUNCTIONS
1 Press the knob once to activate the
SELECTION FRAME.
2 Turn the SKC left or right to select
the desired function with the white
SELECTION FRAME.
3 Press the SKC once to select the
highlighted function. The SELECTION
FRAME turns red.
4 Turn the SKC left or right to adjust the
value. Press the SKC again to confirm
and exit the selection. The SELECTION
FRAME turns white.
Single push
3 seconds push
Turn left
or right to
highlight the
selection
2 Press the SKC for 3 seconds to turn ON
or OFF (standby) the PH-10.