Gold Note PH-10 - User Manual

Other manuals for Gold Note PH-10

Owner's Manual16 pages

Questions and Answers

C
Christopher SmithJul 28, 2025
What to do if my Gold Note Amplifier PH-10 is not working?
- C
  cynthia45Jul 28, 2025
  If your Gold Note Amplifier (PH-10) is not working, first, ensure that you are using shielded interconnect cables for both input and output. Check that the power cord is properly connected and the power outlet is functional. Verify that the interconnect cables are correctly connected to the tonearm. Lastly, inspect the IEC fuse and replace it with one of the same value if it's blown.
A
Ashley SantiagoAug 6, 2025
Why is there a buzzing noise coming from my Gold Note Amplifier?
- B
  Brenda MillerAug 6, 2025
  A buzzing noise from the loudspeakers when using the Gold Note Amplifier can occur for several reasons. It might be due to the phono stage's sensitivity to its environment, so try repositioning it and ensuring it's free from RFI/EMI, and always use shielded cables. Check that the ground connector is correctly plugged in by trying to plug and unplug the ground connectors to find the best solution for your specific audio system. Ensure the interconnect inputs are properly connected to test the phono stage performance. Note that high-performance phono stages may produce a buzzing noise at high volumes when no music is playing, especially with MC gain selected, which is normal. Finally, verify the tonearm and cartridge are correctly installed.
A
Angela BallAug 15, 2025
How to match the cartridge with Gold Note Amplifier PH-10?
- A
  Amy RoweAug 16, 2025
  To match the cartridge with your Gold Note Amplifier PH-10, remember that MC cartridges require specific impedance values, so refer to the manufacturer's specifications to set them up correctly. MM cartridges need a 47K? load and do not require any adjustment. Note that the PH-10 has a fixed capacitance of 330pF.

Summary

IMPORTANT SAFETY INFORMATIONS

Product Usage Precautions

Do not disassemble, use for other purposes, protect from elements, and follow instructions.

Operational Safety Guidelines

Avoid water, clean with dry cloth, ensure ventilation, keep away from heat, and use correct plug.

TECHNICAL SPECIFICATIONS

MAIN FEATURES

Lists key features including SKC, TFT display, EQ curves, subsonic filter, and frequency response.

ANALOGUE INPUTS

Details MM/MC inputs, sensitivity, impedance options, gain, and capacitance.

AUDIO OUTPUTS

Specifies line output levels (RCA and XLR) and output impedance.

POWER

QUICK START

ON;OFF

Instructions for powering the unit ON and OFF using the Master Switch and SKC.

HOW TO SELECT FUNCTIONS

Step-by-step guide on navigating menus and adjusting settings using the SKC.

TROUBLESHOOTING

Matching the cartridge with the PH-10

Setting impedance and load for MM/MC cartridges to ensure proper performance.

Buzzing noise coming from the loudspeakers.

Troubleshooting buzzing noise caused by environmental sensitivity or ground connections.

PH-10 is not working

Solutions for when the PH-10 fails to operate, checking cables and fuse.

CLEANING THE UNIT

Cleaning Instructions

Guidelines for cleaning the unit using a soft cloth and water/detergents.

Gold Note PH-10 Specifications

General

Type	Phono Preamplifier
Output Impedance	50Ω
Weight	4kg
Outputs	1x RCA
Equalization Curves	RIAA
Input Capacitance	100pF, 220pF, 330pF, 470pF
Subsonic Filter	10Hz
Inputs	1x RCA
Frequency Response	20Hz – 20kHz ±0.3dB
Gain	MM: 40dB; MC: 65dB
Input Impedance	10Ω to 47kΩ
Dimensions	200mm W x 80mm H x 260mm D