Need help?Do you have a question about the Gold Note PH-5 and is the answer not in the manual?
General| Power Consumption | 10W |
|---|---|
| Type | Phono Preamplifier |
| Input Impedance | 47kΩ |
| Input Capacitance | 100pF |
| Total Harmonic Distortion | <0.01% (1kHz, 1V RMS) |
Details on the core functionalities and capabilities of the PH-5 phono preamplifier.
Information regarding the RCA and XLR audio output connections and impedance.
Details on power supply requirements, consumption, and fuse rating.
Specifications for MM/MC input sensitivity, impedance options, and gain settings.
Physical dimensions and weight of the unit, both boxed and unboxed.
Description of the LED status light indicators and the main display functionality.
Details on Line Input, Line Output, PSU-IN, Master Switch, IEC socket, and Micro USB.
Instructions on how to power the PH-5 on and off using the Master Switch and display.
Guide on navigating and adjusting settings via the display interface.
Explanation of display elements like Type Selection, DISP brightness, Load, and Gain settings.
Information on the different equalization curves (RIAA, Decca, Columbia) and their enhanced versions.
Instructions for registering your product and information on the warranty policy.
Guidance on matching cartridges with specific impedance values and capacitance for the PH-5.
Resolving buzzing noise related to the phono stage environment, RFI/EMI, and cable connections.
Troubleshooting buzzing noise caused by improper tonearm/cartridge installation or unshielded cables.
Steps to diagnose and resolve issues when the PH-5 unit fails to power on or operate.
Information on other Gold Note products including cartridges, electronics, turntables, and loudspeakers.
To Next Page
