9
If you have any questions contact us at: service@goldnote.it
PH-10 is not working
Buzzing noise coming from
the loudspeakers.
| The interconnect cables
used on the input/output
are not shielded.
| The power cord is not
plugged in.
| The cables are not
connected to the
tonearm.
| The IEC fuse is blown
| Always use shielded
cables.
| Connect the power cord
properly and ensure the
power outlet is working.
| Ensure that the cables are
properly connected.
| Replace it with one of the
same value.
| Check the cartridge and
the tonearm.
| The tonearm and the
cartridge are not installed
properly.
PROBLEM CAUSE SOLUTION
CLEANING THE UNIT
With EXTREME care use ONLY water or detergents for delicate surfaces with a very soft
cloth to sweep dust and remove stains.
Any acid or not extremely soft cloth will irreversibly damage the unit. Do not use alcohol.
To Next Page
Loading...
