What to do if the LED on my Gold Note Power Supply is off?
If the LED on the front panel of your Gold Note PSU-10 EVO is off, here's what you should check: * First, make sure the power cord isn't damaged and is properly connected to both the power outlet and the AC plug on the PSU-10 EVO. * Second, verify that the master switch located on the rear panel of the PSU-10 EVO is turned on.
Why does the DS-10 LED not light up when powered by the Gold Note PSU-10 EVO Power Supply?
If the DS-10 LED doesn't light up when powered by the PSU-10 EVO, the issue might be with the PSU connection cable. Ensure that the PSU CONNECTION CABLE is not damaged and connect it properly to the PSU OUT port on the PSU-10 EVO and to the PSU port on the DS-10.
Details the front panel components and indicators of the PSU-10 EVO.
Details the rear panel connectors and controls of the PSU-10 EVO.
Provides guidance on the optimal placement of the PSU-10 EVO relative to the DS-10.
Explains the process for validating and the terms of the product warranty.
Provides instructions on how to handle product issues and service requests.
Advises against opening the unit and to refer to qualified personnel for service.
Warns against exposing the appliance to rain or moisture.
Covers essential handling, environment, and usage guidelines for the product.
General| Output Voltage | 12V |
|---|---|
| Power Supply Type | Linear |
| Frequency | 50/60 Hz |
| Input Voltage | 100-240V |
| Compatibility | Gold Note devices |
| Voltage | 100-240V AC |
| Connector Type | DC barrel connector |
To Next Page
