Gold Note PSU-10 EVO - Page 9

PSU-10 EVO is designed to work in "slave mode" with DS-10 so you only need to turn the MASTER SWITCH ON and the PSU-10
EVO will be controlled by DS-10.
Every time DS-10 goes into STANDBY (the unit is OFF with the LED ON) the PSU-10 EVO will do the same and you don't need
to turn the MASTER SWITCH OFF.
If you need to turn OFF the MASTER SWITCH of the PSU-10 EVO:
1. turn OFF the MASTER SWITCH on DS-10
2. turn OFF the MASTER SWITCH on PSU-10 EVO
HOW TO POSITION PSU-10 E DS-10
To achieve the best performance DON'T place the PSU-10 EVO on TOP of the DS-10 but on its LEFT SIDE.
Avoid placing the PSU-10 EVO too close to the DS-10 if possible.
8
QUICK START
PSU-10 A SINISTRA
DS-10 ON THE RIGHT HAND SIDEPSU-10 EVO ON THE LEFT HAND SIDE
GOLD NOTE
PSU-10
EVO
GOLD NOTE
DS-10
GOLD NOTE
PSU-10
EVO