Gold Note PSU-10 - Page 13

6
GND SIGNAL GROUND
Every system operates in unique conditions
due to the electrical interaction between
different products and the electrical wiring
and the GND connector on the PSU-10/
PSU-10 EVO allows you to try different
congurations, including connecting it to
the GND of the PH-10/DS-10, to mitigate
EMI (Electro Magnetic Interference) and RFI
(Radio-Frequency Interference) in order to
ensure your system performs at the best.
MASTER-SLAVE MODE
PSU-10 & PSU-10 EVO are designed to work
in “Master-Slave Mode” with other Gold
Note units.
When you turn ON or put in standby the
master unit (such as DS-10 or PH-10) the
PSU-10 or PSU-10 EVO will do the same so
that you don’t have to control every unit
manually.
To turn completely OFF the PSU-10 or PSU-
10 EVO, follow these steps:
1 Turn OFF the MASTER SWITCH of the
master unit (such as DS-10 or PH-10).
2 Turn OFF the MASTER SWITCH of PSU-
10 or PSU-10 EVO.
ATTENTION
When the master switch of PSU-10 and PSU-
10 EVO is ON, the status LED is also ON.
EN
DE
IT