What does it mean when the temperature display shows "H" on my Golden Designs Plumbing Product?
If the temperature display on your Golden Designs Plumbing Product shows "H", it means the temperature inside the sauna room is too high. Turn off the unit.
Why does my Golden Designs Plumbing Product speaker does not work?
If the speaker isn't working, it might be broken and need replacement with a new one of the same specifications. Check if the speaker wire is loose, and if so, disconnect and reconnect the speaker connections. Finally, if the power indicator light for the CD is off, turn on the switch to start work.
What to do if the indicator light for function is not working in my Golden Designs Plumbing Product?
If the indicator light for function isn't working, the heating indicator light might be broken, requiring replacement of the relevant control panel. Alternatively, the circuit board or components could be broken, necessitating replacement of the circuit board. It's also possible that the temperature sensor is broken; in this case, check the connection of the temperature sensor.
What does it mean if the temperature display shows "H" on my Golden Designs Plumbing Product?
If the temperature display shows "H", it means the temperature inside the sauna room is too high. Turn off the unit, and contact the manufacturer.
What to do if the temperature display shows "EP" on my Golden Designs Plumbing Product?
If the temperature display shows "EP", the connector of the temperature sensor might be loose, not connected, or the sensor itself could be damaged. Try disconnecting and reconnecting the connector of the temperature sensor or replacing it with a new one.
What to do if Golden Designs Plumbing Product device will not connect to Bluetooth?
If your device won't connect to Bluetooth, ensure that you do not have any other device connected, as only a single device can be connected at a time. If that’s not the issue, reset the control panel by disconnecting the sauna’s power cord from the wall outlet for 15 minutes.
How to replace a light bulb in Golden Designs Plumbing Product?
If the light bulb in your unit isn't working, start by removing the burned-out light bulb and replacing it with a new one. If that doesn't solve the problem, check the light bulb wiring for looseness and either tighten the connection or replace the lamp assembly. If problems persist, replace the relevant control panel.
What to do if the indicator light for power supply is not working in my Golden Designs Plumbing Product?
If the indicator light for the power supply isn't working, check that the connector is properly connected, or replace it. Also, verify that there is power at the wall outlet by checking your circuit breaker. If those aren't the issue, the indicator light itself might be broken, requiring replacement of the circuit panel.
How to fix Golden Designs Plumbing Product infrared heater that is not heating up?
If your infrared heater isn't heating up, there are several things you can check. First, the heater itself may be broken and need to be replaced. Also, ensure the wire junctions or the heater's wire are securely connected. Check the connection of the temperature sensor. Finally, the circuit board or the relay might not be working, requiring replacement of the circuit board.
What to do if my Golden Designs Plumbing Product sauna is not powering up?
If your Golden Designs sauna isn't powering up, first, ensure the power cord is securely plugged into the wall outlet. Next, check your circuit breaker to confirm the outlet has power. If the issue persists, the power supply or circuit panel may be broken, requiring replacement.
Reinforces safety rules, including supervision, exercise, and pregnancy precautions.
Lists necessary tools, conditions, and precautions before assembling the sauna.
Lists the main components required for assembling the sauna structure.
Outlines essential precautions before and during sauna operation.
Provides step-by-step instructions for turning on and using the sauna controls.
Explains how to adjust temperature and set the timer for the sauna session.
Warns about the risks of excessive body temperature and its symptoms.
Addresses problems with power indicator lights and infrared heaters not heating.
This document is an instruction manual for the Infrared Sauna Models MX-M356-01 (SJ-8323), specifically a 3-person corner infrared sauna.
The infrared sauna is designed to provide therapeutic benefits through far infrared heat. It aims to help users burn calories, reduce toxins, relieve pain, and improve complexions by accelerating blood circulation and activating sweat glands in a lower temperature environment compared to traditional saunas. The sauna uses infrared carbon heat emitter panels to warm the body directly without significantly heating the surrounding air, a process known as conversion. It is intended for indoor use only.
General| Brand | Golden Designs |
|---|---|
| Model | SJ-8323 |
| Category | Plumbing Product |
| Language | English |
To Next Page
