15 Installation
2.4 Power ON/OFF
[Press ‘Standby/Restart’]
There are several ways to turn your XPEED LX2 ON or OFF
● Complete Power Shutdown
There is a Power Switch in the rear panel and once it is ON, you do not need to turn it on or off
each time. It takes a longer time to boot the system if you turned it off by this switch.
● Standby Mode
POWER key is normally used to turn the power of XPEED LX2 on or off. If you press POWER, it
instantly switches your XPEED LX2 off or on. In this mode, the system is not completely shut
down and thus it takes a shorter time to turn it on and off.
● Deep Standby Mode
Deep Standby is used to reduce the standby power consumption. XPEED LX2 is designed to be
energy efficient and to guarantee the power consumption to be under 1W in the deep standby
mode.
To Next Page
Loading...
Need help?
General
