golden interstar XPEED LX2 - Configuring Tuner A

19 First Time Installation
Step 7. Configuring Tuner A
Using LEFT/RIGHT key, you can choose one of the following Configuration Modes:
● Not configured.
● Simple
● Loop-through to: mode to make the Tuner A be internally connected to the TUNER B.
● Equal to: mode to use the same configuration as that of Tuner B.
● Advanced: for an advanced user configuration.
If you choose Simple configuration mode, the following picture will appear.
The five modes are available for the satellite cable connection between LNB and your
XPEED LX2 as below: