EasyManua.ls Logo

golden interstar XPEED LX2 - Exposure and Placement; Installation and Maintenance

golden interstar XPEED LX2
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
iii Safety Instructions
2. Exposure and Placement
Only operate the product in moderate temperatures.
Place the product indoors to avoid exposing it to lightening, rain or direct sunlight.
Do not expose any liquids or sources of open flame (such as candle flame) to the
product.
Do not place the product near any heat emitting appliances. This may cause impairment
in cooling.
Do not place the product on any unstable surface because it may fall and cause serious
personal injuries and/or damage the product.
Always make sure the product has enough space around it for ample ventilation and
heat transfer.
Do not place the product in a closed space (such as a cabinet) without suitable
ventilation.
Be sure to place the product approximately 10 cm away from any appliances that are
exposed to electromagnetic influences, such as a TV.
Do not use any attachments or accessories that are not recommended by the
manufacturer. This may cause hazards to the product, and will void the warranty..
3. Installation and Maintenance
Before connecting or disconnecting the satellite cable to the product, be sure that the
product is unplugged. Failure to do so may cause damage to the LNB.
The LNB cable must be earthed to the system earth for the satellite dish.
Before connecting or disconnecting the cable from the TV, be sure that the product is
unplugged. Failure to do so may cause damage to the TV.
Before cleaning the product, be sure that the product is unplugged.
Use a damp cloth (do not use any solvents) to clean the exterior of the product.

Related product manuals