24
VII. DISASSEMBLY
DISASSEMBLY
Your Buzzaround Lite scooter is designed to be disassembled easily in order to be
transported. When disassembling your scooter, please be sure to follow these simple
instructions.
Remove the Seat
1. Place your scooter on a level surface.
Remove the key from the key switch before you begin to disassemble
your Buzzaround Lite.
2. (Optional) Loosen the armrest adjustment knobs and remove the arms from the seat.
This will reduce the weight of the seat making it easier to lift.
Never pull on the arms or use them as a handle to move the scooter
as they could inadvertently pull out of the receiver bar causing injury.
3. Grip the seat on opposite sides and, with a firm grip; pull the seat straight up.
See figure 15.
Figure 16. Removing the Battery Pack
Figure 15. Removing the Seat
Remove the Battery Pack
4. Lift the battery pack off the scooter. See figure 16.
Remove the Front Basket
5. Remove the front basket by pulling up.
To Next Page
Loading...
