30
IX. TRANSPORTING YOUR Buzzaround Lite™
Figure 25. Buzzaround Lite™ (Model GB108 shown)
All Golden Buzzaround Lite scooters can be equipped with docking
devices for loading onto a vehicle by means of a mechanical lift or hoist. Contact your
Golden Technologies, Inc. provider for more information concerning docking devices and
scooter lift devices.
To Transport Your Buzzaround Lite:
• Disassemble or fold down the seat and tiller (see section VII. “Disassembly”) as close as
possible to the loading area of the vehicle to be used for transporting your scooter.
• The degree to which you disassemble your Buzzaround Lite or fold the seat and tiller
depends on the size and shape of the cargo area of the transporting vehicle.
• Moving blankets or other forms of padding may be used to protect your Buzzaround
Lite during transportation.
• Do not lift your Buzzaround Lite by its plastic body parts or dash. Breakage of these
parts is not covered by the warranty.
• Do not use the tires or wheels to lift the rear carriage. The carriage may rotate and
cause injury or damage.
If your scooter and its components are not properly and securely
stowed during transportation, the scooter or the components may move or become
airborne and cause injury or damage.
Never sit on your Buzzaround Lite when it is being transported.
Secure with an approved tie-down system.
If transporting your scooter on an outside lift, remove seat or make
sure the seat is as down se c u r ely with an approved tie-down system
supplied by your lift manufacturer while a s your s Failure to do
so could result in the seat coming loose and becoming airborne. This situation
could cause problems for the traffic behind you and possibly result in an injury.
To Next Page
Loading...
