To Next Page
M
Michael HebertOct 28, 2025
What to do if my Golden Technologies Scooter has no power?
- SSteven SchmidtOct 29, 2025
If your Golden Technologies Scooter has no power, start by checking the main circuit breaker. You can also remove the battery pack from the scooter and reset it. Further troubleshooting includes measuring voltage across BAT1 and BAT3 on the outside of the battery pack, opening the front console to check connections, and attempting to recharge the battery, potentially replacing the top battery. Load test the batteries and measure voltage on BAT- of one battery and BAT+ on the other. If there is no voltage, reseat the pins and test the connections. Check continuity between the circuit breaker and batteries and replace across the circuit breaker. Reconnect MH2. Tilt the scooter over on its side and remove the controller cover. Disconnect MH1 from CN7 and measure voltage across pin 7 and 13 on...
General
