To Next PageTo Next Page
Need help?Do you have a question about the Golden wheel CS-S868 and is the answer not in the manual?
General| Brand | Golden wheel |
|---|---|
| Model | CS-S868 |
| Category | Sewing Machine |
| Language | English |
Operate correctly and strictly follow safety regulations to avoid accidents.
Technical specifications including working width, height, knife size, power, and weight.
Perform these operations before connecting the machine to the power.
Confirm voltage consistency and check for moisture in the electrical cabinet.
Remove protective paper and confirm the machine's condition after transport.
Instructions for cleaning the split knife, driving wheel, and feed table component.
Explanation of the buttons and functions on the CS-S868 electric cabinet panel.
Information on warnings and error codes displayed on the electrical cabinet.
Procedure for starting the CS-S868 machine and using its functions.
Steps for grinding the knife using a corundum stone.
Procedure for cleaning the grinding stone when its efficiency decreases.
Checking and adjusting the slope symmetry of the knife using the phototube.
Cleaning the grinding stone by hand with a stick, avoiding abrasive methods.
Checking slope symmetry and grinding with the narrow side of the stone if needed.
Setting and adjusting the leather splitting thickness using the digital screen and handle.
Setting the minimum clearance between the knife and the lower feed wheel.
When to use the upper feed wheel for rigid, smooth, or templated materials.
Using the front feed guide knob for high precision leather splitting.
Procedures for maintenance tasks, including changing the cutter.
Maintenance procedures for the CS-S868 machine, including component replacement.
Procedure for exchanging the grinding stone on the CS-S868 machine.
How to exchange the knife wedge guide plate and suggesting replacement with the knife.
