Need help?Do you have a question about the Golden wheel CS-8810 and is the answer not in the manual?
Technical diagrams for table hole specifications for CS-8810 and CS-8810D sewing machines.
Location guide for installing the safety switch on CS-8810D models.
Schedule and instructions for lubricating sewing machine components.
Step-by-step guide for correctly inserting needles.
Detailed guide for threading needles on CS-8810 and CS-8820 series.
Procedure for threading the bobbin case for proper sewing.
Instructions for properly inserting the bobbin case into the sewing hook.
Method for bringing up the bobbin thread to the needle plate.
Guidance on adjusting upper and lower thread tensions for optimal stitch quality.
How to adjust roller presser pressure for proper fabric feeding.
Procedure to set the desired stitch length on the sewing machine.
Instructions for adjusting feed wheel height for different needle types.
Method to adjust the hook height for proper needle and hook synchronization.
Diagnosing and fixing problems with loose upper thread tension.
Diagnosing and fixing problems with loose lower thread tension.
Resolving issues where loops appear on the fabric during sewing.
Identifying and correcting skipped stitches during general sewing.
Addressing skipped stitches and thread unraveling at the beginning of sewing.
Methods to achieve smooth and even seams on the material.
Resolving puckering caused by excessive thread tension.
Addressing issues where the material slips during the sewing process.
Fixing bobbin thread tangling and bobbin spinning during trimming.
Causes and solutions for needle breakage during sewing operations.
General| Brand | Golden wheel |
|---|---|
| Model | CS-8810 |
| Category | Sewing Machine |
| Language | English |
To Next Page
