To Next PageTo Next Page
Need help?Do you have a question about the Golden wheel CS-5900 and is the answer not in the manual?
Key safety warnings and operational precautions for using the sewing machine.
Instructions for correctly installing the machine's oil reservoir.
Guidance on installing the motor pulley and V-belt for machine operation.
Essential notices and key points to consider before operating the sewing machine.
Procedure for lubricating the machine, including oil type and level checks.
Procedure for adjusting the amount of lubricating oil in the main shaft.
Adjusting the height and angle of the presser foot and the feed dog.
Adjusting the timing between the feed dog and the needle.
Adjusting the counterforce of the feed lever for stable operation.
Procedure for adjusting the height of the needle bar and needle.
Adjusting the timing of the looper relative to the needle's motion.
Adjusting the looper's extreme right position timing.
Ensuring adequate clearance between the needle and the looper to prevent damage.
Matching the motion of needle guards with the looper for efficient operation.
Adjusting the position of the looper thread take-up cam for proper threading.
Setting the position of the thread take-up lever for optimal loop formation.
Setting the correct position of the thread eyelet frame to prevent faulty stitches.
Procedure for changing the needle gauge and related parts.
Routine daily checks to ensure the machine is in optimal operating condition.
Weekly maintenance tasks, including cleaning and oil checks.
Causes and solutions for thread breakage during sewing.
Troubleshooting steps for when stitches are skipped on the needle thread.
Addressing skipped seams caused by the looper thread not forming correctly.
Resolving skipped stitches on the needle thread due to poor interlooping.
Diagnosing and fixing issues with stitch tightness and consistency.
Causes and remedies for needle breakage during operation.
Addressing puckering issues in the fabric caused by machine settings.
General| Brand | Golden wheel |
|---|---|
| Model | CS-5900 |
| Category | Sewing Machine |
| Language | English |
