Need help?Do you have a question about the Goldmund TELOS 3500 and is the answer not in the manual?
Details the Analog input (1 x Analog RCA connector) for connecting preamps.
Details the Digital input/output (2 x Digital S/pdif RCA) for connecting digital sources.
Explains the power-on process and front panel display for operating the amplifier.
Details the power-off process and un-muting the amplifier.
Explains how to navigate the menu for input selection.
Lists potential errors and their resolution steps.
Describes the time required for the amplifier to reach optimal operating temperature.
Discusses adjusting speaker polarity for sonic quality.
Explains the exclusive "Mechanical Grounding" construction for vibration evacuation.
Details the DC-coupled amplifier protection against speaker damage.
Provides guidance on cleaning and servicing the amplifier.
Lists continuous and instantaneous power ratings.
Details the amplifier's frequency response characteristics.
Specifies the propagation delay of the signal.
Provides THD+N figures for different stages and power levels.
Specifies slew rate and rise time.
Details the signal-to-noise ratio.
Describes the power supply components and design.
Lists the types of speaker output connectors.
Lists the types of input connectors available.
Mentions the overload protection circuit.
Provides the physical dimensions and weight of the amplifier.
States the warranty period for parts and labor.
Illustrates the location of speaker output terminals.
Identifies the locations and ratings of power supply fuses.
To Next Page
General