Need help?Do you have a question about the golmar ART 5W/GTWIN and is the answer not in the manual?
General safety guidelines and warnings for installation and use.
Lists the technical specifications and features of the monitor.
Explains how calls are made, received, and managed.
Explains the purpose of each connection terminal on the monitor.
Explains the function of the JP1, JP2, and JP3 jumpers.
Details the functions of the buttons on the monitor's front panel.
Explains how to use the 'Push-to-talk' communication feature.
Describes how to adjust screen brightness, contrast, and volume.
Details the SW1 switch for WiFi mode and user code configuration.
Explains the SW2 switch for configuring the monitor as master or slave.
Describes the function of the JP3 jumper for bus termination.
Specifies the recommended height and clearance for the mounting connector.
Outlines the steps for physically attaching the mounting connector to the wall.
Guides on connecting cables and mounting the monitor onto the connector.
Specifies the recommended height and clearance for the embedding box.
Details embedding the box and attaching the mounting connector.
Guides on connecting cables and mounting the monitor onto the connector.
Explains how to adjust ringtone, speaker, and call melody volumes.
Describes how to adjust screen brightness.
Explains how to add, modify, and delete contacts.
Guides on adding a new contact for intercom calls within the same apartment.
Guides on adding a new contact for intercom calls to a different apartment.
Details how to modify existing contacts in the monitor directory.
Explains how to remove contacts from the monitor directory.
Notes that this section has no function.
Describes how to set the date and time for saved call videos.
Explains how to configure call forwarding to a smartphone.
Guides on linking the GCall app with the master monitor.
Details how to perform a connection test for call forwarding.
Provides QR codes for downloading the GCall mobile application.
Instructs to contact technical support for maintenance.
Explains how to assign custom functions to a button.
Describes how to export video messages using a microSD card.
Guides on exporting individual video messages.
Explains how to export all recorded video messages.
Describes how to view monitor hardware and software information.
Displays details about the monitor's apartment, internal code, and versions.
Explains how to reset the monitor to its factory default settings.
Details system configurations for buildings with one or multiple access points.
Details system types and cable specifications for FA-Gtwin power supply.
Explains how to connect multiple monitors in parallel within an apartment.
Describes adding a button for apartment front door calls.
Details the SAV-GTWIN call repeater and its configuration.
Shows wiring for an additional call repeater using SAR-12/18 relay.
To Next Page
General
