Need help?Do you have a question about the golmar NHEA GB2 and is the answer not in the manual?
General| RAM | 1 GB |
|---|---|
| Flash Memory | 8 GB |
| Touchscreen | Capacitive multi-touch |
| Power | 12Vdc |
| Wiring | Ethernet |
| Processor | Quadcore |
| Connectivity | WiFi |
| Ports | Ethernet |
| Battery | No |
Essential safety measures before installation and operation.
Explains how the system functions for calls and communication.
Identifies and describes the physical parts of the terminal.
Explains the operations of the main function button.
Details the meaning of the terminal's status LED indicators.
Describes controls for adjusting audio and call volumes.
Explains the purpose of each terminal connection point.
Explains DIP switch functions for terminal addressing and system configuration.
Details DIP switch settings for assigning apartment addresses up to 32.
Visual guide for setting DIP switches for apartment codes 1 through 4.
Visual guide for setting DIP switches for apartment codes 5 through 16.
Details DIP switch settings for assigning apartment addresses up to 128.
Visual guide for setting DIP switches for apartment codes 17 through 32.
Visual guide for setting DIP switches for apartment codes 33 through 48.
Visual guide for setting DIP switches for apartment codes 49 through 64.
Visual guide for setting DIP switches for apartment codes 65 through 80.
Visual guide for setting DIP switches for apartment codes 81 through 104.
Visual guide for setting DIP switches for apartment codes 105 through 128.
Explains the meaning of status LEDs on the terminal and buttons.
Instructions on how to change and select ringtones for different call types.
Details how to establish intercom calls within the same apartment.
Explains how to activate/deactivate the 'do not disturb' mode.
Describes how to use the terminal for light activation functions.
Guidelines for correctly positioning the wall mounting bracket.
Steps for physically attaching the mounting bracket to the wall.
How to connect cables and mount the terminal onto the bracket.
Guidelines for placing the embedding box within the wall.
Steps for installing the box and attaching the mounting connector.
How to connect cables and mount the terminal onto the bracket within the box.
Wiring scheme for a 32-apartment system with a specific lock release.
Specifies cable distances and wire cross-sections for reliable connections.
Wiring scheme for a 128-apartment system with a specific lock release.
Specifies cable distances and wire cross-sections for reliable connections.
To Next Page
