To Next PageTo Next Page
Need help?Do you have a question about the Goodman ComfortNet DSZC180361AD and is the answer not in the manual?
General| Model | DSZC180361AD |
|---|---|
| Type | Heat Pump |
| Cooling Capacity (BTU) | 36000 |
| Cooling Capacity (Ton) | 3 |
| Heating Capacity (Ton) | 3 |
| SEER Rating | 18 |
| HSPF Rating | 9.5 |
| Refrigerant | R-410A |
| Voltage (VAC) | 208/230 |
| Phase | 1 |
| Heating Capacity (BTU) | 36000 |
| Stages | Variable |
Safety guidelines for handling refrigerants, including warnings and EPA regulations.
Describes the UC PCB, its function, and system integration.
Explains the basic principles of the cooling and heating refrigerant cycles.
Covers operation sequences for cooling, heating, and fan modes.
Details the control and timing of the system's defrost cycle.
A chart to diagnose cooling and heating problems based on symptoms and causes.
Procedure for checking system voltage and locked rotor voltage.
Explains the ComfortNet™ system, thermostat interaction, and communication.
Covers system information, setup, and advanced diagnostic features.
Explains how to access and interpret air handler diagnostic menus.
Addresses troubleshooting the ComfortNet™ system communication network using LEDs.
Lists and explains conditions indicated by the 7-segment LED display.
Details diagnostic codes and troubleshooting for specific air handler control boards.
Comprehensive table of diagnostic codes for system faults and troubleshooting.
Covers ECM motor checks, fan relay contacts, and PSC motor checks.
Explains the diagnostic system for Copeland Comfort Alert™ on UC controls.
Covers resistance tests, ground tests, and general compressor checks.
Explains how to test the unloader function of the compressor.
Details testing compressor operation using a test cord and capacitor.
Covers checking the reversing valve operation and solenoid continuity.
Details testing the defrost control sequence and voltage.
Explains how to test temperature sensors using an ohmmeter.
Describes the electronic control for AVPTC/MBVC and its features.
Covers troubleshooting motor control circuits for air handlers.
Details checking electric heat sequencers for proper operation.
