To Next PageTo Next Page
Need help?Do you have a question about the Goodman ComfortNet DSZC180361AC and is the answer not in the manual?
General| Product Category | Heat Pump |
|---|---|
| Brand | Goodman |
| Model Number | DSZC180361AC |
| Cooling Capacity (BTU/h) | 36000 |
| SEER | 18 |
| Refrigerant | R-410A |
| Voltage (V) | 208/230 |
| Phase | 1 |
| Compressor Type | Scroll |
| Warranty | 10 years |
| Stages | 2 |
Details on handling refrigerants safely according to regulations.
Explanation of two-stage capacity control for ComfortNet models.
Explanation of the cooling cycle and its operation.
Explanation of the heating cycle and its operation.
Operation and control of the defrost cycle for ComfortNet models.
Chart for diagnosing cooling and heat pump system issues.
Procedure for checking system voltage supply and locked rotor voltage.
Troubleshooting the ComfortNet system network using LEDs.
Diagnostic codes for PCBJA101/102 air handler control modules.
Diagnostic codes for PCBJA104 air handler control modules.
Using the UltraCheck-EZ tool to diagnose ECM motors.
Adjusting ECM motor CFM settings using dipswitches.
Step-by-step guide for setting airflow using dipswitches.
Instructions for setting airflow using dipswitches and tables.
Safety warnings and general checks for compressor servicing.
Procedure for testing compressor winding resistance.
Procedure for testing compressor for ground faults.
Procedure to test the unloader function with Comfort Alert.
Operation test procedure for compressor failure diagnosis.
Procedure to check reversing valve operation and solenoid.
Procedure to test the defrost control sequencing.
Procedure to test outdoor air and coil temperature sensors.
Troubleshooting motor control circuits for air handlers.
Troubleshooting data line voltage and bias switch settings.
Operation sequence for cooling modes.
Operation sequence for auxiliary and emergency heating.
Heating operation details based on outdoor temperature.
Operation sequence for defrost cycle in heat pump mode.
General practices for refrigeration system repair and brazing.
Procedures for leak testing using nitrogen.
Procedure for evacuating the refrigeration system.
Procedure for charging the refrigeration system.
Safety warnings regarding refrigerant handling.
Information on TXV systems and charging methods.
Charging procedures for adjustable expansion valves.
Procedure to check compressor efficiency.
Explanation and checking procedure for superheat.
Diagnosing and correcting compressor burnout issues.
